3D Printed Kitchen Gadgets That Actually Get Used

Most kitchen gadgets are bought on impulse and end up at the back of a drawer. The 3D printed ones that survive are different: they were made for a specific shelf, a specific jar, a specific problem. This is a list of the ones that genuinely earn their place, plus honest notes on which plastics belong near food.

Organisers that fit your kitchen, not a catalogue

The strongest argument for printing kitchen items is that they can be made to the millimetre.

• Drawer dividers cut to your drawer's exact depth, so cutlery and utensils stop sliding.
• Spice racks and tiered risers sized to your jars and your cupboard, including awkward corner cupboards.
• Under-shelf baskets and hooks that clip onto the exact thickness of your shelves.
• Lid holders for pots and pans, mounted inside a cupboard door.
• Tea bag and capsule dispensers for the exact brand you buy.
• Wall-mounted holders for foil, cling film and paper towels.

If you like the look of geometric printed objects, the same style that makes our Aria vases look good works for utensil pots and fruit bowls.

Small tools that solve one problem well

• Bag clips with a spring-free, print-in-place hinge.
• Jar openers in two or three sizes, with a grippy TPU insert.
• Knife guards for storing sharp knives in a drawer safely.
• Measuring scoops for coffee, protein powder or pet food, sized to your recipe.
• Bottle and can organisers for the fridge door.
• Tube squeezers for tomato paste and toothpaste.
• Egg holders, lemon squeezers, herb strippers and other classics.
• Cookie cutters and stamps, covered in detail in custom cookie cutters.

Which plastic belongs where

Not everything printed should touch food, and nothing printed should go in the oven. The good news is that most of the gadgets above hold packaging or tools rather than food itself, so material choice is simple.

Use	Recommended material	Why
Drawer dividers, racks, hooks	PLA or PETG	Rigid, cheap, no food contact
Jar openers, bag clips	PETG + TPU grips	Tougher than PLA, flexible grip
Scoops, cookie cutters, dry-food contact	PETG	Easier to clean, more heat tolerant
Near the hob, dishwasher items	ASA or ABS	Handles heat, but not for direct food contact
Anything in the oven or with hot liquids	Not 3D printed	Plastics soften; use silicone or metal

For items that touch food, hand-washing is the rule: printed surfaces have fine layer grooves where residue can sit, and a dishwasher's heat deforms PLA. We wrote the full explanation in Is PLA food safe?. If a gadget needs to be smooth and easy to sanitise, ask Fantasy Lab 3D about a higher-resolution print and a sealed, sanded finish.

Repairs and replacements

Half of the "gadgets" people order are really replacement parts: a blender lid tab, a coffee grinder hopper, a fridge shelf clip, the little foot that fell off a stand mixer. These are quick to model from a photo and measurements. The manufacturer often does not sell them separately, and a printed copy in PETG usually outlasts the original. See replacement parts with 3D printing for how to send us what you have.

Colour and looks

Kitchen prints do not have to be beige. Filament comes in matte white, marble, wood-fill, pastel colours and metallic tones, and a single print can combine two or three colours if you want a divider that matches a cabinet handle. For a family kitchen, we can add names or icons to scoops and containers so nobody argues about whose is whose.

How ordering works

Send a photo of the drawer, cupboard or gadget with rough measurements, or a link to a design you have seen, and we will confirm the sizes and quote. Simple items print in a few hours; a full set of drawer dividers or a multi-tier rack may take a day or two. The price depends on size, material and finish.

Ready to order?

Tell Fantasy Lab 3D what is annoying you in the kitchen through the contact section, with a photo and a measurement or two. You can also DM us on Instagram @fantasylab3d.almaty. We deliver across Kazakhstan and ship abroad on request.